A-9060DH Modular Digital Matrix Mixer/Amplifier

$0.00
Brand: TOA
Product Code: A-9060DH
Availability: In Stock

The A-9060DH Matrix Mixer is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The most appropriate modules can be selected depending on applications. Since it comes with two 60 W power amplifiers, it can individually perform multi-origin broadcasts. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.
Specification
(*1) 0 dB = 1 V
Power Source    120 V AC, 60 Hz
Power Consumption    150 W
Audio Input    Max. 8 channels, modular construction (modules optional)
Power amplifier input 1, 2: 0 dB(*1), 10 kΩ, RCA pin jack
Audio Output    Preamplifier output 1, 2: 0 dB(*1), 300 Ω, unbalanced, RCA pin jack
Speaker output 1, 2: 60 W, 83 Ω × 2, BTL output,
removable terminal block (4 pins)
Module Slot    Analog input (slot 1 - 8): -10 dB(*1), 10 kΩ, unbalanced
Digital input (slot 1 - 4): 24 bit/48 kHz
MIX output (slot 1 - 8): -14 dB(*1), 330 Ω (CH 1 prefader output), unbalanced
Digital output (slot 5 - 7): 24 bit/48 kHz
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
Digital Audio Signal Reference Level    -20 dBFS
Power Bandwidth    20 - 20k Hz, 0.008% THD
Frequency Response    Power amplifier section: 20 - 20k Hz, +0, -1 dB
Analog input module to speaker output: 20 - 20k Hz, +1, -3 dB
Total Harmonic Distortion    Power amplifier section: 0.0008% (22 kHz LPF, 1 kHz, rated power)
Analog input module to speaker output: 0.008% (22 kHz LPF, 1k Hz, rated power)
S/N Ratio    At Input short, 20 - 20k Hz, set to ALL FLAT or OFF setting
Output volume min.: 90 dB (preamplifier output)
Output volume max.: 61 dB
(preamplifier output, Input 1 volume: 0 dB, Other Inputs: OFF)
Power amplifier section: 110 dB
Cross Talk    Over 64 dB (at 20 kHz)
Tone Control    Bass: ±12 dB (at 100 Hz)
Treble: ±12 dB (at 10 kHz)
Parametric Equalizer    10 bands, Frequency: 20 - 20,000 Hz, 31 steps, Variable range: ±12 dB, Q: 0.3 - 5
Speaker Equalizer    15 (compatible with TOA speakers only)
High-pass Filter    -12 dB/oct, Variable frequency range: 20 - 400 Hz, 14 steps
Low-pass Filter    -12 dB/oct, Variable frequency range: 4,000 - 20k Hz, 8 steps
Compressor    Depth: 1 - 5
Delay    0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only
Scene/Event Memory    32
Operation Mode    Matrix mode/Mixer mode (selector switch)
Auxiliary Function    Key lock function
Control Input/Output    RS-232C(*2), D-sub connector (9 P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC,
short-circuit current: Under 1 mA, removable terminal block (14 pins)
Control output: 4 outputs, open collector output, withstand voltage: 27 V DC,
control current: 50 mA, removable terminal block (14 pins)
Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or
input the DC voltage of 0 to +10 V, removable terminal block (14 pins)
Operating Temperature    -10℃ to +40℃
Operating Humidity    35% to 80% RH (no condensation)
Finish    Panel: Aluminum, hair-line, black
Case: Surface-treated steel plate, black, paint
Dimensions    420 (W) × 107.6 (H) × 395 (D) mm
Weight    9 kg
Accessory    Power cord (2 m) …1, Rack mounting bracket …2, Bracket mounting screw …4,
Blank panel …7, Blank panel mounting screw …14,
Removable terminal plug (4 pins) …1, Removable terminal plug (14 pins) …1,
CD-ROM …1, Start guide …1

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: