wxm-860sl

$0.00
Brand: WINERSAT
Product Code: wxm-860sl
Availability: In Stock

Features:
4 in 1 Transmux Modulator, including ASI & DVB-S/S2 receiver, Multiplexer, QAM Modulator and RF up converter functions.
Meet DVB-S/MPEG-2 broadcasting.
Dual ASI receiver.
- Automatic incoming bit rate detection
- Automatic packet detection (188/204)
- Supports continuous and burst packet mode
Dual DVB-S receiver (optional DVB-S2).
- Supports up to 5MHz frequency drift search
- Supports wide range of symbol rate drift search
- Supports C band and Ku band
Multiplexer.
- PID filtering/edit / Delete/mapping available
- PCR correction( high precision ) available
- Supports automatic PID assignment/mapping
- User-friendly front panel interface to setup the multiplexer
- Supports network monitoring and remote control
- EIT time adjustment according to local time zone
- Supports Network Information Table (NIT) injector
- Service/service provider name can be edited
QAM Modulator.
- Supports 32/64/128/256 QAM constellation
- Supports ITU-T J.83A and B modes
- Flexible interleaver depth control in ITU-T J.83B mode
- Various IF frequency support
- High MER and low bit error rate
RF up converter.
- 47~862MHz output frequency agility
- 60 dBmV output level with Hybrid module IC
- Optional RF output by channel/frequency step (each 250 kHz)
- Low out-of-band noise and high VSB attenuation
- Double PLL synthesized channel control

QPSK RF INPUT :     
Frequency Range :950MHz to 2150 MHz
Input Level :-65dBm ~ -25 dBm
Input Impedance :75 Ohms
Mode :DVB QPSK
FEC VITERBI Rate :Auto Scan. 1/2, 2/3, 3/4, 5/6, 7/8
Symbol Rate :2 Msps to 45 Msps
Input Impedance :75 Ohms
Connector :F-Type Female

DVB-ASI INPUT
Link character length :10 bit
Bit rate on link :270 M bit/s
Useful data rate :1 M bits/s to 54 M bit/s
Max. Input Voltage :880 mV p-p
Data packet length :188 bytes or 204 bytes
Max. MPEG-2 bit rate :216 M bits/s
Connection medium :Coaxial cable
Input Impedance :75 Ohms
Connector :BNC

CABLE RF OUTPUT
Frequency Range :47MHz to 862MHz
Bandwidth :7 / 8 MHz (PAL)
Output Level ≧ 60dB mV
Output Level Adjust ≧15 dB
Spurious ≧55 dB C
Out-of-band Noise :60 dB typical
CNR :60 dB typical
Frequency Accuracy/Stability :±5KHz
Output Impedance :75 Ohms
Connector :F-Type Female

LNB POWER
Voltage :OFF, 13V or 18V ±10%
Current :500mA max
Tone Frequency :OFF or 22kHz
      
CONTROL INTERFACE
Communication Interface :Ethernet
Electrical Interface :IEEE 802.3 10 Base-T/100 Base-TX
Data Link :Max 100Mbps
Connector type :RJ45

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: