CPS Contractor precision series amplifirer

$0.00
Brand: Electrovoice
Product Code: CPS series
Availability: In Stock
CPS 2.12 MK II Contractor Precision Series Class-H Power Amplifier
CPS 2.12 MK II Designed for the contractor, the CPS 2.12 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.12 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
CPS 2.4 MK II Contractor Precision Series Class-H Power Amplifier
CPS 2.4 MK II Designed for the contractor, the CPS 2.4 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.4 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
CPS 2.6 MK II Contractor Precision Series Class-H Power Amplifier
CPS 2.6 MK II Designed for the contractor, the CPS 2.6 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.6 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
CPS 4.10 1000 W per channel 4-channel amplifier
CPS 4.10 Four channels in one compact rack-efficient unit
1000 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
Rear-mounted attenuators
Switchable 50 Hz high-pass filter (Hi-Z mode)
Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
Phoenix-type input and output connections
Remote power-on/off contact
Programmable power-on delay settings
Front-to-rear fans
CPS 8.5 500 W per channel 8-channel amplifier
CPS 8.5 Eight channels in one compact rack-efficient unit
500 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
Rear-mounted attenuators
Switchable 50 Hz high-pass filter (Hi-Z mode)
Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
Phoenix-type input and output connections
Remote power-on/off contact
Programmable power-on delay settings
Front-to-rear fans
RCM-810 IRIS-Net remote control module for CPS Series amplifiers
RCM-810 Enable powerful control and supervision capabilities Integrate up to 100 devices in each remote control network, 250 with multiple networks Support for 2-, 4-, and 8-channel CPS models Freely programmable control inputs and outputs Load-monitoring for each channel Variable Load Drive for independent channel impedance on 4- and 8-channel amps (2-10 Ω in 0.1 Ω steps)
LML-1 Loudspeaker Line Measuring Load
LML-1 The LML-1 can be used with all Electro-Voice CPS Series multi channel amplifiers in 100 V line mode for loudspeaker line supervision. These amplifiers provide, together with RCM-810 modules, a convenient loudspeaker line supervision based on impedance measurement. The impedance of a loudspeaker line, however, depends on many factories, such as cable length, cable capacitance, speaker impedance, temperature, etc., and therefore can vary greatly. The LML-1 is connected to the end of a 100 V loudspeaker line to generate stable conditions. At 20 kHz the LML-1 represents a defined load, while having minimal load over the normal audio frequency range. With the LML-1 thus the accuracy of the impedance measurement is increased, and broken or shorted speaker lines can be detected reliably even on long cable runs.
CPS 4.5 500 W per channel 4-channel amplifier
CPS 4.5 Four channels in one compact rack-efficient unit
500 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
Rear-mounted attenuators
Switchable 50 Hz high-pass filter (Hi-Z mode)
Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
Phoenix-type input and output connections
Remote power-on/off contact
Programmable power-on delay settings
Front-to-rear fans
CPS 2.9 MK II Contractor Precision Series Class-H Power Amplifier
CPS 2.9 MK II Designed for the contractor, the CPS 2.9 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.9 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: